The Garrett Metal Detector features excellent detection depth, rugged design, and ease of operation. Great for finding lost items on the beach.

This 14" Multi Cutter Metal Saw 15amp comes with a built in clamp for precise cutting. Multi-Cutter offers versatility by cutting a wide variety of materials including ferrous and non-ferrous metals. Multi-Cutter cuts 4 times faster than chop saws and 8 times faster than portable band saws in 2" x 2" x 1/4" angle iron.

Heavy Duty grinder used for aggressive material removal. Can be used to cut or grind many different product with the appropriate wheel

This rubber track compact Excavator by Bobcat has an Operating Weight of 7,468 lb, a bucket digging force of 7,284 lbf, a maximum reach of 204.3 in, and stands a 70 inches wide with zero tail swing. 

The T550 Bobcat is our largest skid-steer. This Bobcat comes with tracks and has a Rated Operating Capacity of 1,995 lb, and a Operating Weight of 7,557 lb.

The S175 Bobcat is our smallest skid-steer. This Bobcat comes with wheels and has a Rated Operating Capacity of 1,750 lb, and a Operating Weight of 6,220 lb. 

The Force/2 Intec Insulation Blower is an excellent blower for your fiberglass and cellulose needs. This blower comes with an easy reach and quick pin setting for dialing in material flow, and comes with an adjustable flow. For high production the blower can output 30-40 lbs/min of cellulose and 9-11 lbs/min of fiberglass. Rental comes with 150 ft of hose.

Dry areas quickly with this compact, three-speed blower. Quickly dry carpet, hard floors, fresh paint, concrete sealer and much more.

Husqvarna 326LS is a 25cc string trimmer with straight shaft, and a double string head. E-TECH II and built for tough commercial use. With a total of 9 lbs this light weight trimmer 

• Durable gear box designed for commercial application
• Forged three-piece crankshaft for maximum durability

This 18inch Sod Cutter comes fully equipped with 2 cutting speeds, customizable cutting depth, 2 transport speeds as well as a powered reverse. With a Honda GX160 4.8HP engine, this sod cutter can be used for preparing for a new landscaped bed, clearing for a new sidewalk or driveway, or tackling other home improvement projects that require removing sod.

17.5" Aerator, Honda GX120, 3.5HP, Compact aerator. Simple to use and aerates over 20,000 sq ft/hour. Easy to maneuver, built-in lift handles and 2 removeable weights

Single phase submersible pumps offer the versatility and durability contractors need for light dewatering. This electric pump has a hose size of 2", weighs 25lbs, has a max head of 39', a max capacity of 53 gpm, and runs on 110 Volts.

With a max capacity of 210 gpm, a max head of 106ft and a 5.5 hp motor, these centrifugal trash pumps have proven themselves on jobsites around the world. Pumps feature hardened ductile iron impeller and volute with patented pump cover, volute and volute insert providing a rugged, easy to maintain pump that will stay on the job longer, and can handle solid objects up to 1 inch in size.

This 2in Small Transfer Pump has a max capacity of 159 gpm, a head max of 98ft, a suction lift of 25PSI and a max of 4 HP. The dewatering pump series has been designed to handle the removal of relatively clean jobsite water. With its self-priming centrifugal pumping action and overall compact size, the pump is deal for the contractor with the need fro temporary water removal

Designed for the compaction of asphalt as well as granular and mixed materials with some cohesive content in confined areas such as parking lots, highway and bridge construction, next to structures, curbs and abutments. Large capacity polyethylene water tank located within the front lift cage for protection and is semi-transparent for easy check of the water level. Large in-tank water filter, 20" or 15" plate width

Add the exclusive WM 100 4-cycle engine to the preferred vibratory rammer design in the industry and you have a winning combination. The WM 100 engine features a special governor system, carburetor linkage, breather system and piston rings to provide maximum performance. Exclusive air filter compensation system allows for longer run time between filter changes

The EZ Haulr allows for the transportation of virtually any make or model of walk-behind outdoor power equipment with just a 2" receiver hitch. The EZ Haulr's three-piece construction safely transports equipment weighing up to 500 lbs, and adjustable width ramps allow for wheel spacing up to 35" in width and up to 46" front to back

This Pneumatic Floor Nailer is highly sensitive and takes a 3/4in nail. The nailer is perfectly balanced as the tool rest on both the sub floor and the wood floor.

This gasoline powered walk-behind 46inch trowel used to smooth, level and polish concrete surfaces for a quality finish. This trowel is excellent for tackling large projects for a faster, more efficient, and more consistent finish.

3000 PSI @ 3.0 GPM Belt Drive Steel Frame Pressure Washer, 270cc Honda GX270 OHV With Low Oil Shut Down

2400 PSI@ 2.4 GPM Direct Drive Steel Frame Pressure Washer, 196cc Honda GX200 OHV With Low Oil Shut Down

WILTON Unbreakable 30" Handle Sledge Hammer, 12LB Head -- Unbreakable handle is made with tempered steel, and surrounded by heavy-duty molded rubber. Ergonomic handle absorbs shock, ensures comfort and has a slip-resistant grip. High-visibility head adds instant identification under any job site conditions; encourages safe work habits. Not to be used to strike any object harder than 46HRC. Never replace a sledge handle again! Outlasts wood and fiberglass handle sledges by thousands of strikes

Post Driver 22 makes planting posts easy while it minimizes damage to the tops of fence posts. Weighted and reinforced steel head.

The SL8 floor sander combines tilt action sanding and a drum that runs at a slow constant speed to allow the DIYer to achieve professional results! This Drum Sander is 8" in size, runs at 1800 rpm, and has a dust bag.