This cement mixer can mix 2-3 bags at a time, and is small enough to maneuver right to the location of the pour. 

Brick Saw used for cutting concrete, masonry, brick, block, stone, asphalt, tile, and other solid materials. This saw is provided with a sliding table that allows the stone to move during cutting. This saw comes with 14in blade, and a max cut depth of 5in.

A power concrete screed is a tool used to smooth and level freshly poured concrete surfaces. It can be used in place of a man-powered screed bar to strike off excess concrete. A power screed works by consolidating and/or vibrating the wet concrete mixture. Renter has the option of 12', 14', or 16' boards available.

The Hilti Jack Hammer is an exceptionally powerful breaker for heavy-duty concrete demolition, asphalt cutting, earthwork and driving ground rods. It can be used to demolish reinforced concrete slabs and foundations, breaking asphalt, digging, trenching and tamping in rocky hard clay and other dense earthwork. The Jack Hammer comes on a custom made dolly for it that has 4 different breaking tips on it.

The PG 280 is a single disc floor grinder that you can quickly convert for edge grinding on both sides. It efficiently grinds adhesives, paint, epoxy and spackle. With a grinding width of 280 mm it is suitable for small to medium concrete areas. Designed to facilitate an ergonomic work position, it is easy and convenient to use. The machine is light and compact and therefore easy to transport and set-up. In a recent upgrade, the machine was updated to flexibly follow uneven floors and to considerably reduce vibrations.

Designed for the compaction of asphalt as well as granular and mixed materials with some cohesive content in confined areas such as parking lots, highway and bridge construction, next to structures, curbs and abutments. Large capacity polyethylene water tank located within the front lift cage for protection and is semi-transparent for easy check of the water level. Large in-tank water filter, 20" or 15" plate width

Add the exclusive WM 100 4-cycle engine to the preferred vibratory rammer design in the industry and you have a winning combination. The WM 100 engine features a special governor system, carburetor linkage, breather system and piston rings to provide maximum performance. Exclusive air filter compensation system allows for longer run time between filter changes

This gasoline powered walk-behind 46inch trowel used to smooth, level and polish concrete surfaces for a quality finish. This trowel is excellent for tackling large projects for a faster, more efficient, and more consistent finish.